LD雷射二極體規范列表

作者:江志宏

說明：

雷射是由英文字 LASER的音譯而來。而 LASER這個字是取自 Light Amplification by Stimulated Emission of Radiation 字串的頭一個字母拼湊而來，雷射二極體(laser diode，簡稱：LD)是某些發光效率特別好的二極體加上光學的共振腔形成，體積比傳統的固態雷射或氣體雷射小很多。

由于半導體雷射比傳統型雷射具有很多優點，比如說輕薄短小、耐震、耗電少、反應快、耐沖撞、壽命長、效率高、方向性佳及輸出功率高等特性，適合供作長距離、大容量之通信用光源及存取高密度記錄媒體(藍光)，目前也有應用于需要高亮度的微投影。

雷射光其主要特色有：

(1)雷射光為單色光，其頻率寬度很窄。 (2)雷射光線為平行光線，其指向性很高，經過長距離后，仍能維持細小光束而不散開。 (3)雷射光之集光性佳，能量密度較高

雷射二極體分類：

雷射二極體波長分類與用途：

各項規范列表：

CNS規范列表:
規范	中文說明
CNS 11640	雷射安全使用標準
CNS 15016-1	雷射產品安全－第１部：設備分類、要求和用戶指南
CNS 15016-2	雷射產品安全－第２部：光纖通訊系統之安全性
CNS 11715	一般用雷射唱機檢驗法
CNS 13648	通信用雷射二極體量測法
CNS 13649	通信用雷射二極體之可靠度測試
CNS 13650	通信用雷射二極體之批品質控制測試
CNS 14181	光纖通信用類比視訊雷射傳輸和接收模組之性能量測法
CNS 14182	光纖通信用類比視訊雷射傳輸和接收模組之可靠度及批品質控制測試

ISO雷射標準(ISO laser standards)

ANSI　|　 BS　|　 DIN　|　 EN　|　 GB　|　 ISO　|　 JIS　|　 NF　|

編號	中文名稱	英文名稱
IEC 60601-2-22-1995	醫用電氣設備第2-22部分:診斷和治療用雷射設備安全的特殊要求	Medical electrical equipment - Part 2: Particular requirements for the safety of diagnostic and therapeutic laser equipment
IEC 60747-5-4-2006	半導體器件.分立器件.第5-4部分:光電器件.半導體雷射器	Semiconductor devices - Discrete devices - Part 5-4: Optoelectronic devices - Semiconductor lasers
IEC 60825-1 AMD 1-1997	雷射產品的安全第1部分:設備分類、要求和使用者指南修改1	Safety of laser products - Part 1: Equipment classification, requirements and user's guide; Amendment 1
IEC 60825-1 AMD 2 Corrigendum 1-2002	雷射產品的安全.第1部分:設備分類、要求和使用者指南.修改件2	Safety of laser products - Part 1: Equipment classification, requirements and user's guide; Amendment 2
IEC 60825-1 AMD 2-2001	雷射產品的安全第1部分:設備分類、要求和使用者指南修改2	Safety of laser products - Part 1: Equipment classification, requirements and user's guide; Amendment 2
IEC 60825-1 Edition 1.2-2001	雷射產品的安全.第1部分:設備分類、要求和使用者指南	Safety of laser products - Part 1: Equipment classification, requirements and user's guide
IEC 60825-1-1993	雷射產品的安全第1部分:設備分類、要求和使用者指南	Safety of laser products; part 1: equipment classification, requirements and user's guide
IEC 60825-12-2005	雷射產品的安全.第12部分:用于資訊傳輸?shù)淖杂煽臻g光通信系統的安全	Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information
IEC 60825-2-2005	雷射產品的安全.第2部分:光纖通信系統的安全(OFCS)	Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)
IEC 60825-4-2006	雷射產品的安全.第4部分:雷射防護器	Safety of laser products - Part 4: Laser guards
IEC 60856 AMD 1-1991	預錄光學反射視訊光碟系統 “影音光碟”?50Hz/625行?PAL制修改1	Pre-recorded optical reflective videodisk system; "laser vision" 50 Hz/625 lines; PAL; amendment 1
IEC 60856 AMD 2-1997	預錄光學反射視訊光碟系統 “影音光碟”?50Hz/625行?PAL制修改2	Pre-recorded optical reflective videodisk system "Laser vision" 50 Hz/625 lines - PAL; Amendment 2
IEC 60856-1986	預錄光學反射視訊光碟系統 “影音光碟”?50Hz/625行?PAL制	Pre-recorded optical reflective videodisk system. "Laser vision" 50 Hz/625 lines - PAL
IEC 60857 AMD 1-1991	預錄光學反射視訊光碟系統 “影音光碟”?60Hz/525行?M/NTSC制修改1	Pre-recorded optical reflective videodisk system; "laser vision" 60 Hz/525 lines; M/NTSC; amendment 1
IEC 60857 AMD 2-1997	預錄光學反射視訊光碟系統 “影音光碟”?60Hz/525行?M/NTSC制修改2	Pre-recorded optical reflective videodisk system - "Laser vision" 60 Hz/525 lines - M/NTSC; Amendment 2
IEC 60857-1986	預錄光學反射視訊光碟系統 “影音光碟”?60Hz/525行?M/NTSC制	Pre-recorded optical reflective videodisk system. "Laser vision" 60 Hz/525 lines - M/NTSC
IEC 61040-1990	激光輻射用功率和能量測量探測器、儀器和設備	Power and energy measuring detectors, instruments and equipment for laser radiation
IEC 61096 AMD 1-1996	數位音訊雷射唱盤重放設備特性的測量方法修改1	Methods of measuring the characteristics of reproducing equipment for digital audio compact discs; Amendment 1
IEC 61096-1992	數位音訊雷射唱盤重放設備特性的測量方法	Methods of measuring the characteristics of reproducing equipment for digital audio compact discs
IEC 61280-1-4-2003	纖維光學通信子系統試驗程式.第1-4部分:一般通信子系統.多模纖維雷射發射機用二維近場資料的採集和換算	Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems; Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters
IEC 61280-2-10-2005	纖維光學通信子系統試驗程式.第2-10部分:數位系統.雷射發射器的時間分辨線性調頻脈沖和α指數測量	Fibre optic communication subsystem test procedures - Part 2-10: Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters
IEC 61751-1998	通信用雷射模組可靠性評定	Laser modules used for telecommunication - Reliability assessment
IEC 62107-2000	高級影音光碟光碟交換系統 規范	Super Video Compact Disc - Disc-interchange system-specification
IEC 62148-11-2003	光纖有源元件及器件.包裝和介面標準.第11部分:14針調製器集成雷射二極體發射機	Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator-integrated laser diode transmitters
IEC 62148-12-2004	纖維光學有源元件和器件.包裝和介面標準.第12部分:帶同軸RF連接器的雷射傳輸器	Fibre optic active components and devices - Package and interface standards - Part 12: Laser transmitters with a coaxial RF connector
IEC 62149-3-2004	纖維光學有源元件和器件.性能標準.第3部分:2.5Gbit/s調製器-集成雷射二極體發射機	Fibre optic active components and devices - Performance standards - Part 3: 2,5 Gbit/s modulator-integrated laser diode transmitters
IEC/TR 60825-10-2002	雷射製品的安全性.第10部分:IEC 60825-1的應用導則和注釋	Safety of laser products - Part 10: Application guidelines and explanatory notes to IEC 60825-1
IEC/TR 60825-13-2006	雷射產品的安全.第13部分:雷射產品分類測量	Safety of laser products - Part 13: Measurements for classification of laser products
IEC/TR 60825-14-2004	雷射產品安全.第14部分:使用者指南	Safety of laser products - Part 14: A user's guide
IEC/TR 60825-5-2005	雷射產品安全性.第5部分:IEC 60825-1的製造商檢查清單	Safety of laser products - Part 5: Manufacturer's checklist for IEC 60825-1
IEC/TR 60825-8-1999	雷射產品的安全第8部分:醫療雷射設備安全使用指南	Safety of laser products - Part 8: Guidelines for the safe use of medical laser equipment
IEC/TR 60825-9-1999	雷射產品的安全第9部分:非相干光輻射最大允許曝光量的彙集	Safety of laser products - Part 9: Compilation of maximum permissible exposure to incoherent optical radiation
IEC/TR3 60825-3-1995	雷射產品的安全第3部分:雷射顯示器和指示器指南	Safety of laser products - Part 3: Guidance for laser displays and shows
ISO 10110-17-2004	光學和光學儀器.光學元件和系統製圖準備.第17部分:激光輻射損害閾	Optics and photonics - Preparation of drawings for optical elements and systems - Part 17: Laser irradiation damage threshold
ISO 11145-2006	光學和光子學.雷射和雷射設備.詞彙和符號	Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols
ISO 11146-1-2005	雷射和雷射相關設備.雷射光束寬度、發散角和束擴散率的試驗方法.第1部分:無象散和簡單象散束	Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams
ISO 11146-2-2005	雷射和雷射相關設備.雷射光束寬度、發散角和束擴散率的試驗方法.第2部分:一般像散束	Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams
ISO 11151-1-2000	雷射和雷射設備標準光學元件第1部分:紫外線、可見和近紅外光譜范圍用元件	Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
ISO 11151-2-2000	雷射和雷射設備標準光學元件第2部分:紅外光譜范圍用元件	Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range
ISO 11252-2004	雷射和雷射設備.雷射裝置.對檔的最低要求	Lasers and laser-related equipment - Laser device - Minimum requirements for documentation
ISO 11254-1-2000	雷射和雷射設備光學表面雷射導致?lián)p傷閾值的測定第1部分:1-on-1試驗	Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1-on-1 test
ISO 11254-2-2001	雷射器和雷射相關設備雷射導致光學表面損傷閾值的確定第2部分：S-on-1?試驗	Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S-on-1 test
ISO 11551-2003	光學和光學儀器.雷射和雷射設備.光學 雷射元件光吸收性試驗方法	Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components
ISO 11553-1-2005	機械安全.雷射加工機械.第1部分:一般安全要求	Safety of machinery - Laser processing machines - Part 1: General safety requirements
ISO 11554-2006	光學和光子學.雷射和雷射設備.雷射光束功率、能量和時間特徵的試驗方法	Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics
ISO 11670 Technical Corrigendum 1-2004	雷射和雷射相關設備.雷射光束參數的試驗方法.束位置穩定性.技術勘誤1	Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability; Technical Corrigendum 1
ISO 11670-2003	雷射和雷射設備.雷射光束參數的試驗方法.束定位穩定性	Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability
ISO 11810-1-2005	雷射和雷射相關設備.手術布單和/或病人保護覆蓋物耐雷射性的試驗方法和分類.第1部分:基本點燃和穿透性	Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Part 1: Primary ignition and penetration
ISO 11990-2003	光學和光學儀器.雷射和雷射設備.氣管柄雷射抗性的測定	Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts
ISO 12005-2003	雷射和雷射設備.雷射光束參數的試驗方法.偏振	Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization
ISO 13320-1-1999	細微性分析雷射衍射法第1部分:一般原則	Particle size analysis - Laser diffraction methods - Part 1: General principles
ISO 13694 Technical Corrigendum 1-2005	光學和光學儀器.雷射和雷射設備.雷射光束能量密度分佈的試驗方法.技術勘誤1	Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution; Technical Corrigendum 1
ISO 13694-2000	光學和光學儀器雷射和雷射設備雷射光束能量密度分佈的試驗方法	Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power [energy] density distribution
ISO 13695-2004	光學和光子學.雷射及其相關設備.雷射光譜特性的試驗方法	Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers
ISO 13697-2006	光學和光子學.雷射和雷射相關的設備.光學 雷射元件的鏡面反射率和正透視度的試驗方法	Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components
ISO 13919-1-1996	焊接電子束和雷射焊接頭缺陷的品質分級指南第1部分:鋼	Welding - Electron and laser-beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel
ISO 13919-2-2001	焊接電子束和雷射光束焊接接頭缺陷品質等級指南第2部分：鋁及其可焊合金	Welding - Electron and laser beam welded joints; Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys
ISO 14408-2005	雷射手術用氣管掐管.標識及附帶資訊要求	Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information
ISO 15367-1-2003	雷射及雷射相關設備.雷射光束波前形狀測定用試驗方法.第1部分:術語和基礎領域	Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects
ISO 15367-2-2005	雷射及雷射相關設備.雷射光束波前形狀測定用試驗方法.第2部分:Shack-Hartmann感測器	Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 2: Shack-Hartmann sensors
ISO 15609-4-2004	金屬材料的焊接程式規范和鑒定.焊接程式規范.第4部分:雷射光束焊接	Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding
ISO 15614-11-2002	金屬材料焊接程式的規范和鑒定.焊接程式試驗.第11部分:電子和雷射光束焊接	Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding
ISO 15616-1-2003	高品質焊接和切割用CO2雷射射線機的驗收試驗.第1部分:通用原理和驗收條件	Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions
ISO 15616-2-2003	高品質焊接和切割用CO2雷射射線機的驗收試驗.第2部分:靜態和動態準確度的測定	Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy
ISO 15616-3-2003	高品質焊接和切割用CO2雷射射線機的驗收試驗.第3部分:氣體流量和壓力測量儀的校正	Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure
ISO 16063-11-1999	振動與沖擊感測器的校準方法第11部分:雷射干涉法作主要的振動校準	Methods for the calibration of vibration and shock transducers - Part 11: Primary vibration calibration by laser interferometry
ISO 16063-13-2001	振動和沖擊感測器的校準方法第13部分：用雷射干涉法的基本校準	Methods for the calibration of vibration and shock transducers - Part 13: Primary shock calibration using laser interferometry
ISO 17123-6-2003	光學和光學儀器.大地測量和測繪儀器的現場試驗規程.第6部分:旋轉雷射器	Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 6: Rotating lasers
ISO 17526-2003	光學和光學儀器.雷射器和雷射相關設備.雷射器的使用壽命	Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers
ISO 17658-2002	焊接.氧氣火焰切割、雷射光束切割和等離子體切割的缺陷	Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology
ISO 18755-2005	細陶瓷(高級陶瓷、高級工業陶瓷).用雷射閃光法測定塊體陶瓷的熱擴散	Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thermal diffusivity of monolithic ceramics by laser flash method
ISO 22826-2005	金屬材料焊縫的破壞性試驗.雷射和電子束焊接窄接頭的硬度試驗(維氏和努氏硬度試驗)	Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
ISO 22827-1-2005	Nd:YAG雷射射線焊接機器的加速試驗.帶光纖傳送的機器.第1部分:雷射裝配	Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 1: Laser assembly
ISO 22827-2-2005	Nd:YAG雷射射線焊接機器的加速試驗.帶光纖傳送的機器.第2部分:移動裝置	Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 2: Moving mechanism
ISO 2971-1998	捲煙和過濾嘴公稱直徑的測定使用雷射光束測量儀的方法	Cigarettes and filter rods - Determination of nominal diameter - Method using a laser beam measuring apparatus
ISO 6161-1981	個人用護目鏡防激光輻射的濾光鏡和護目鏡	Personal eye-protectors; Filters and eye-protectors against laser radiation
ISO 8130-13-2001	粉末涂料第13部分：採用雷射衍射的細微性分析	Coating powders - Part 13: Particle size analysis by laser diffraction
ISO/TR 11146-3 Technical Corrigendum 1-2005	雷射和雷射相關設備.雷射光束寬度、發散角度和束擴散率的試驗方法.第3部分:本征的和幾何的雷射光束分類、擴散和	Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods; Technical Corrigendum 1
ISO/TR 11146-3-2004	雷射和雷射相關設備.雷射光束寬度、發散角度和束擴散率.第3部分:內在和幾何雷射光束分類、擴散和試驗方法細節	Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods
ISO/TR 11552-1997	雷射和雷射設備雷射材料處理機械性能規范和金屬材料切削基準	Lasers and laser-related equipment - Laser materials-processing machines - Performance specifications and benchmarks for cutting of metals
ISO/TR 11991-1995	上呼吸道雷射手術中通氣管理指南	Guidance on airway management during laser surgery of upper airway
ISO/TR 17671-6-2005	焊接.金屬材料焊接建議.第6部分:雷射光束焊接	Welding - Recommendations for welding of metallic materials - Part 6: Laser beam welding
ISO/TR 22588-2005	光學和光子學.雷射和雷射相關設備.雷射光學元件感應吸收效應的測量和評估	Optics and photonics - Lasers and laser-related equipment - Measurement and evaluation of absorption-induced effects in laser optical components
ISO/TS 17477-2003	使用2維移動光學型雷射器的焊接和切割用CO2雷射光束機器的驗收試驗	Acceptance tests for CO<(Index)2>-laser beam machines for welding and cutting using 2D moving optics type
編號	中文名稱	英文名稱

美國雷射標準(ANSI laser standards)

ANSI　|　 BS　|　 DIN　|　 EN　|　 GB　|　 ISO　|　 JIS　|　 NF　|

編號	中文名稱	英文名稱
ANSI Z136.1 Errata-1993	雷射的安全使用.勘誤表	Safe use of lasers; Errata
ANSI Z136.1-2000	雷射器的安全使用	Safe Use of Lasers
ANSI Z136.2-1997	雷射二極體和LED光源的光纖通信系統的安全使用	Safe Use of Optical Fiber Communication Systems Utilizing Laser Diode and LED Sources
ANSI Z136.3-2005	保健設施中雷射器的安全使用	Safe Use of Lasers in Health Care Facilities
ANSI Z136.4-2005	危害評定用雷射器安全測量的美國國家標準推薦實施規程	American National Standard Recommended Practice for Laser Safety Measurements for Hazard Evaluation
ANSI Z136.5-2000	教育機構中雷射設備的安全使用	Safe Use of Lasers in Educational Institutions
ANSI Z136.6-2005	戶外雷射器的安全使用	Safe Use of Lasers Outdoors
ANSI/ASME B89.4.19-2006	基于球形座標測量系統的雷射器性能評價	Performance Evaluation of Laser Based Spherical Coordinate Measurement Systems
ANSI/AWS C7.2-1998	雷射光束焊接、切割和打孔推薦規程	Recommended Practices for Laser Beam Welding, Cutting, and Drilling
ANSI/EIA/TIA 455-127-1991	多模雷射器的光譜特徵	Spectral Characterization of Multimode Lasers
ANSI/EIA/TIA 455-48B-1990	光纖包覆層直徑的雷射類儀器測量	Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments
ANSI/NFPA 115-2003	雷射器防火措施	Laser Fire Protection
ANSI/TIA-455-130-2001	雷射二極體的高溫壽命試驗	Elevated Temperature Life Test for Laser Diodes
ANSI/TIA-455-48B-1990	利用雷射儀器測量光纖包覆層直徑	Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments
ANSI/TIA-568-B.1-4-2003	商用建筑電信電纜敷設標準.第1部分:一般要求.補充件4.?第6類850nm雷射優選的50/125微米多模纖維的鑒別	Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber
ANSI/TIA/EIA 455-128-1996	半導體雷射器閾值電流的測定程式	Procedures for Determining Threshold Current of Semiconductor Lasers
ANSI/TIA/EIA 455-130-2001	雷射二極體的抗高溫壽命試驗	Elevated Temperature Life Test for Laser Diodes
ANSI/TIA/EIA 455-48B-1990	用雷射測量儀測量光纖連皮直徑	Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments
ANSI/TIA/EIA 568-B.1-4-2003	商用建筑電信電纜敷設標準.第1部分:一般要求.附錄4.類別6、850nm雷射優選50/125微米多模纖維	Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber
ASTM A 1006/A 1006M-2000	雷射光束焊、平頭、無鍍層、鋼制總管的標準規范	Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded
ASTM C 1070-1986	用雷射擴散法測定氧化鋁和石英細微性分佈的試驗方法	Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
ASTM D 3460-1998	有白色浮水印和無浮水印的票據、油印機、影印機、複照和雷射印表機用按尺寸切割的辦公用紙的標準規范	Standard Specification for White Watermarked and Unwatermarked Bond, Mimeo, Spirit Duplicator, Reprographic, and Laser Printer Cut-Sized Office Papers
ASTM D 4464-2000	雷射散射測定催化材料細微性分佈的標準試驗方法	Standard Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering
ASTM D 5174-2002	用脈沖雷射磷光光度法測定水中微量鈾的標準試驗方法	Standard Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry
ASTM D 6187-1997	帶有氮雷射感應螢光的石油污染位點的錐形透度計技術特性的標準操作規程	Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence
ASTM D 6466-1999	用Sirolan雷射掃描纖維直徑分析儀測定羊毛和其他動物纖維直徑的標準試驗方法	Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
ASTM D 7134-2005	用矩陣輔助雷射解吸/離子化(MALDI)-飛行時間(TOF)質譜(MS)法測定無規立構聚苯乙烯的平均分子量和分子量分佈	Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)
ASTM D 7153-2005	航空燃料凍結點的標準試驗方法(自動雷射法)	Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
ASTM E 1458-1992	用光掩模原版校準檢驗雷射繞射粒子定尺寸儀器的試驗方法	Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
ASTM F 1364-2003	使用校準設備驗證干涉雷射成像無損輪胎檢驗系統檢驗?zāi)芰Φ臉藴蕦嵤┮?guī)范	Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System
ASTM F 1457-1994	與雷射印表機相關的術語	Standard Terminology Relating to Laser Printers
ASTM F 1457b-1994	與雷射印表機相關的標準術語	Standard Termninology Relating to Laser Printers
ASTM F 1497a-1999	導管軸耐雷射性能測定的標準試驗方法	Standard Test Method for Determining Laser Resistance of the Shaft of Tracheal Tubes
ASTM F 1628-1995	雷射外科學用套箍和未套箍氣管導管及有關治療的標記和標志的標準規范	Standard Specification for Labeling and Marking of Cuffed and Uncuffed Tracheal Tubes and Related Treatments Intended for Use During Laser Surgery
IEEE 647-1995	單軸雷射陀螺規格導則和試驗規程	(Format guide and test procedure for single-axis laser gyros)
編號	中文名稱	英文名稱

英國雷射標準(BS laser standards)

ANSI　|　 BS　|　 DIN　|　 EN　|　 GB　|　 ISO　|　 JIS　|　 NF　|

編號	中文名稱	英文名稱
BS 3900-J13-2001	涂料的試驗方法.涂覆粉試驗.用雷射衍射法分析粒徑	Methods of test for paints - Testing of coating powders - Particle size analysis by laser diffraction
BS 5381-2-1998	煙草和煙草製品物理特性測定方法.第2部分:用雷射光束測量儀器測定捲煙和濾嘴標準直徑	Methods for determination of physical properties of tobacco and tobacco products - Nominal diameter of cigarettes and filter rods using a laser beam measuring apparatus
BS 6955-1-1994	振動和沖擊感測器的校準.採用雷射干涉測量法對主振動的校準方法	Calibration of vibration and shock pick-ups - Methods for primary vibration calibration by laser interferometry
BS 7334-6-1992	建筑施工用測量儀器.第6部分:雷射儀器使用精度的測定方法	Measuring instruments for building construction - Methods for determining accuracy in use of laser instruments
BS DD IEC/PAS 61280-2-10-2003	纖維光學通信子系統試驗程式.數位系統.雷射發射機的時間分辨線性調頻脈沖和α因數測量	Fibre optic communication subsystem test procedures - Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters
BS EN 12254-1999	雷射工作場所用螢?zāi)?安全要求和試驗	Screens for laser working places - Safety requirements and testing
BS EN 12584-1999	氧氣火焰切割、雷射光束切割和等離子體切割缺陷.術語	Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology
BS EN 15042-1-2006	覆層厚度測量和表面波紋表徵.採用雷射感應表面聲波法對各膜層的彈性常數、密度和厚度的測定指南	Thickness measurement of coatings and characterization of surfaces with surface waves - Guide to the determination of elastic constants, density and thickness of films by laser induced surface acoustic waves
BS EN 207-1999	眼睛保護.抗雷射輻射用濾光鏡和護目器(雷射護目鏡)	Personal eye-protection - Filters and eye-protectors against laser radiation (laser eye-protectors)
BS EN 208-1999	眼睛防護.雷射和雷射系統調節工作用護目鏡(雷射調節護目鏡)	Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
BS EN 2266-005-2005	航空航太系列.通用電纜.操作溫度為-55?°C?到?200?°C .紫外雷射可印刷.產品標準	Cables, electrical, for general purpose?—?Operating temperatures between??-55?℃?and 200?℃ —?Part 005: UV laser printable?—?Product standard
BS EN 2266-007-2005	航空航太系列.通用電纜.操作溫度為-55?°C?到?200?°C .紫外雷射可印刷多芯裝套電纜.產品標準	Cables, electrical, for general purpose?—?Operating temperatures between?–55?℃?and 200?℃ —?Part 007: UV laser printable multicore jacketed cable?—?Product standard
BS EN 2267-007-2005	航空系列.一般用途的電纜,電器.-55°C和260°C之間的操作溫度.DMA族、單個可列印紫外雷射和多芯附件.產品標	Cables, electrical, for general purpose?—?Operating temperatures between -55?°C and 260?°C?—?Part 007: DMA family, single ink-jet printable and multicore assembly?—?Product standard
BS EN 2267-008-2005	航空系列.一般用途的電纜,電器.-55°C和260°C之間的操作溫度.DM族、單個可列印紫外雷射和多芯附件.產品標	Cables, electrical, for general purpose?—?Operating temperatures between -55?°C and 260?°C?—?Part 008: DM family, single UV laser printable and multicore assembly?—?Product standard
BS EN 2267-009-2005	航空系列.一般用途的電纜,電器.-55℃和260℃之間的操作溫度.DRA族、單個可列印UV雷射和多芯附件.產品標準	Cables, electrical, for general purpose?—?Operating temperatures between -55?℃?and 260?℃ —?Part 009: DRA family, single and multicore assembly?—?Product standard
BS EN 2267-010-2005	航空系列.一般用途的電纜,電器.-55℃和260℃之間的操作溫度.DM族、單個可列印UV雷射.產品標準	Cables, electrical, for general purpose?—?Operating temperatures between -55?℃?and 260?℃ —?Part 010: DR family, single UV laser printable?—?Product standard
BS EN 2713-007-2005	航空航太系列.單芯和多芯電纜的一般用途.操作溫度在-55?°C?和200?°C之間.遮罩式（螺旋式）和有護套的可印	Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55?°C and 200?°C - Screened (spiral) and jacketed, UV laser printable - Product standard
BS EN 2714-007-2005	航空航太系列.單芯和多芯電纜的一般用途.操作溫度在-55?°C?和260?°C之間.遮罩式（螺旋式）和有護套的可印	Cables, electrical, single and multicore for general purpose?—?Operating temperatures between -55?℃?and 260?℃ —?Part 007: Screened (spiral) and jacketed, UV laser printable?—?Product standard
BS EN 2714-011-2005	航空航太系列.單芯和多芯電纜的一般用途.操作溫度在-55?°C?和260?°C之間.DM族、遮罩式（螺旋式）和有護套	Cables, electrical, single and multicore for general purpose?—?Operating temperatures between -55?℃?and 260?℃ —?Part 011: DM family, screened (spiral) and jacketed, UV laser printable?—?Product standard
BS EN 2714-012-2005	航空航太系列.單芯和多芯電纜的一般用途.操作溫度在-55?°C?和260?°C之間.DM族、遮罩式（麻花型）和有護套	Cables, electrical, single and multicore for general purpose?—?Operating temperatures between -55?℃?and 260?℃ —?Part 012: DM family, screened (braided) and jacketed, UV laser printable?—?Product standard
BS EN 2714-013-2005	航空航太系列.單芯和多芯電纜的一般用途.操作溫度在-55?°C?和260?°C之間.DM族、遮罩式（螺旋式）和有護套	Cables, electrical, single and multicore for general purpose?—?Operating temperatures between -55?℃?and 260?℃ —?Part 013: DR family, screened (spiral) and jacketed, UV laser printable?—?Product standard
BS EN 31253-1996	雷射和相關設備.雷射裝置.機械介面	Lasers and laser-related equipment - Laser device - Mechanical interfaces
BS EN 3475-706-2005	航空航太系列.飛行器用電纜.試驗方法.雷射可標記性	Cables, electrical, aircraft use?—?Test methods?—?Part 706: Laser markability
BS EN 60601-2-22-1996	醫療電氣設備.安全專門要求.雷射診斷和治療設備規范	Medical electrical equipment - Particular requirements for safety - Specification for diagnostic and therapeutic laser equipment
BS EN 60825-1-1994	雷射產品的輻射安全性.第1部分:設備分類、要求和使用者指南	Safety of laser products - Equipment classification, requirements and user's guide
BS EN 60825-12-2004	雷射產品的安全.用于資訊傳輸?shù)淖杂煽臻g光通信系統的安全	Safety of laser products - Safety of free space optical communication systems used for transmission of information
BS EN 60825-2-2004	雷射產品的安全.光纖通信系統的安全	Safety of laser products - Safety of optical fibre communication systems (OFCS)
BS EN 60825-4-1998	雷射產品安全.雷射防護裝置	Safety of laser products - Laser guards
BS EN 60856-1993	50HZ/625行預錄式光反射視訊光碟錄影系統"雷射視訊光碟".PAL制規范	Specification for pre-recorded optical reflective videodisk system "Laser vision" 50 Hz/625 lines - PAL
BS EN 61040-1993	雷射輻射功率和能量探測器、儀錶和設備規范	Specification for power and energy measuring detectors, instruments and equipment for laser radiation
BS EN 61096-1993	數位雷射唱機用放音設備特性測量方法	Methods of measuring the characteristics of reproducing equipment for digital audio compact discs
BS EN 61280-1-4-2003	光纖通信子系統基本試驗程式.一般通信子系統的試驗程式.多模纖維雷射發射機用二維近場數據的採集和整理	Fibre optic communication subsystem basic test procedures - Test procedures for general communication subsystems - Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters
BS EN 61751-1998	雷射電信模組.可靠性評定	Laser modules used for telecommunication - Reliability assessment
BS EN 62107-2002	高級雷射視訊光碟.光碟互換系統.規范	Super video compact disc - Disc-interchange system-specification
BS EN 62148-11-2004	纖維光學有源元件及器件.包裝和介面標準.14針調製器集成雷射二極體發射機	Fibre optic active components and devices - Package and interface standards - 14-pin modulator-integrated laser diode transmitters
BS EN 62148-12-2004	纖維光學有源元件和器件.包裝和介面標準.帶同軸RF連接器的雷射發射機	Fibre optic active components and devices - Package and interface standards - Laser transmitters with coaxial RF connector
BS EN 62149-3-2004	纖維光學有源元件和器件.性能標準.2.5Gbit/s調製器-集成雷射二極體發射機	Fibre optic active components and devices - Performance standards - 2,5 Gbit/s modulator-integrated laser diode transmitters
BS EN 821-2-1997	高技術陶瓷.整體陶瓷.熱物理特性.?雷射閃爍法(或熱脈沖法)對熱擴散率的測定	Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Determination of thermal diffusivity by the laser flash (or heat pulse) method
BS EN ISO 11146-1-2005	雷射和雷射相關設備.雷射光束寬度、發散角和束擴散率的試驗方法.無象散和簡單象散束	Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Stigmatic and simple astigmatic beams
BS EN ISO 11146-2-2005	雷射和雷射相關設備.雷射光束寬度、發散角和束擴散率的試驗方法.一般象散束	Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - General astigmatic beams
BS EN ISO 11149-1997	光學和光學儀器.雷射和雷射相關裝置.非遠端通訊雷射用的光纖連接器	Optics and optical instruments - Lasers and laser related equipment - Fibre optic connectors for non-telecommunication laser applications
BS EN ISO 11151-1-2000	雷射和雷射相關設備.標準光學元件.紫外線、可見光和近紅外光譜范圍內的元件	Lasers and laser-related equipment - Standard optical components - Components for the UV, visible and near-infrared spectral ranges
BS EN ISO 11151-2-2000	雷射和雷射相關設備.標準光學元件.紅外光譜范圍內的元件	Lasers and laser-related equipment - Standard optical components - Components for the infrared spectral range
BS EN ISO 11252-2004	雷射和雷射相關設備.雷射裝置.文獻工作的最低要求	Lasers and laser-related equipment - Laser device - Minimum requirements for documentation
BS EN ISO 11254-1-2000	雷射和雷射相關設備.光表面雷射導致?lián)p傷閾的測定.1-on-1試驗	Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - 1-on-1 test
BS EN ISO 11254-2-2001	雷射和雷射相關設備.光表面雷射導至損傷閾值的測定.S-on-1試驗	Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - S-on-1 test
BS EN ISO 11551-2004	光學和光學儀器.雷射和雷射設備	Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components
BS EN ISO 11553-1-2005	機械安全.雷射加工機械.一般安全要求	Safety of machinery - Laser processing machines - General safety requirements
BS EN ISO 11670-2003	雷射器和雷射相關設備.雷射光束參數的試驗方法.束定位穩定性	Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability
BS EN ISO 11810-1-2005	雷射和雷射相關設備.手術布單和/或病人保護覆蓋物耐雷射性的試驗方法和分類.基本點燃和穿透性	Lasers and laser-related equipment - Test method and classification for laser resistance of surgical drapes and/or patient protective covers - Primary ignition and penetration
BS EN ISO 11990-2003	光學和光學儀器.雷射器和相關的雷射設備.氣管柄抗雷射性的測定	Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts
BS EN ISO 12005-2003	雷射器和雷射相關設備.雷射光束參數的試驗方法.偏振	Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization
BS EN ISO 13694-2001	光學和光學儀器.雷射和雷射設備.雷射光束能量密度分佈的試驗方法	Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution
BS EN ISO 13695-2004	光學和光子學.雷射和相關設備.雷射的光譜特性的試驗方法	Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers
BS EN ISO 13919-1-1997	焊接.電子和雷射光束焊接接頭.缺陷的品質級別導則.鋼	Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Steel
BS EN ISO 13919-2-2001	焊接.電子和雷射光束焊接接頭.缺陷的品質分級指南.鋁及其可焊合金	Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Aluminium and its weldable alloys
BS EN ISO 15367-1-2003	雷射和雷射相關設備.測定雷射光束波陣面形狀的試驗方法.術語及基礎領域	Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Terminology and fundamental aspects
BS EN ISO 15609-4-2004	金屬材料焊接程式的規范和合格鑒定.焊接程式規范.雷射光束焊接	Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Laser beam welding
BS EN ISO 15614-11-2002	金屬材料焊接程式的規范和合格鑒定.焊接程式試驗.電子和雷射光束焊接	Specification and qualification of welding procedures for metallic materials - Welding procedure test - Electron and laser beam welding
BS EN ISO 15616-1-2003	高品質焊接和切割用CO2雷射光束機的驗收試驗.通用原則和驗收條件	Acceptance tests for CO2- laser beam machines for high quality welding and cutting - General principles, acceptance conditions
BS EN ISO 15616-2-2003	高品質焊接和切割用CO2雷射光束機的驗收試驗.靜態和動態精確度的測定	Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Measurement of static and dynamic accuracy
BS EN ISO 15616-3-2003	高品質焊接和切割用CO2雷射光束機的驗收試驗.氣體流量和壓力測量儀的校正	Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Calibration of instruments for measurement of gas flow and pressure
BS EN ISO 17526-2003	光學和光學儀器.雷射器和雷射相關設備.雷射器的使用壽命	Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers
BS EN ISO 22827-1-2006	Nd:YAG雷射光束焊接機器的驗收試驗.帶光纖送的機器.雷射裝配	Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Laser assembly
BS EN ISO 22827-2-2006	Nd:YAG雷射光束焊接機器的驗收試驗.帶光纖傳送的機器.移動機理	Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Moving mechanism
BS IEC 60825-8-2000	雷射產品的安全.醫療雷射設備安全使用指南	Safety of laser products - Guidelines for the safe use of medical laser equipment
BS ISO 10110-13-1998	光學和光學儀器.光學元件和系統圖紙的製備.第13部分:雷射輻射損壞閾值	Optics and optical instruments - Preparation of drawings for optical elements and systems - Laser irradiation damage threshold
BS ISO 10110-17-2004	光學和光學儀器.光學元件和系統製圖準備.雷射輻射損害閾	Optics and optical instruments - Preparation of drawings for optical elements and systems - Laser irradiation damage threshold
BS ISO 13320-1-2000	細微性分析.雷射衍射方法.一般規則	Particle size analysis - Laser diffraction methods - General principles
BS ISO 14408-1998	雷射外科用氣管管子的設計.標記和附加資訊要求	Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information
BS ISO 16063-11-2001	振動和沖擊感測器的校準方法.採用雷射干涉量度法的主要振動校準	Methods for the calibration of vibration and shock transducers - Primary vibration calibration by laser interferometry
BS ISO 16063-13-2002	振動和沖擊感測器的校準方法.採用雷射干涉測量法的主要沖擊校準	Methods for the calibration of vibration and shock transducers - Primary shock calibration using laser interferometry
BS ISO 22826-2006	金屬材料焊縫的破壞性試驗.雷射和電子束焊測定窄接頭硬度的試驗(維氏和努氏硬度試驗)	Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
BS ISO TR 11552-1998	雷射和與雷射相關的設備.雷射材料-加工機械.金屬切削的性能規范和基準點	Lasers and laser-related equipment - Laser materials-processing machines - Performance specifications and benchmarks for cutting of metals
BS ISO TR 11991-1997	上導氣管雷射外科手術時導氣管的管理指南	Guidance on airway management during laser surgery of upper airway
BS QC 720102-1997	光纖系統和子系統用帶引線的雷射二極體模數的空白詳細規范	Blank detail specification for laser diode modules with pigtail for fibre optic systems and subsystems
編號	中文名稱	英文名稱

德國雷射標準(DIN laser standards)

ANSI　|　 BS　|　 DIN　|　 EN　|　 GB　|　 ISO　|　 JIS　|　 NF　|

編號	中文名稱	英文名稱
DIN 13972-1-2001	牙科技術.雷射焊接過程的品質保證.第1部分:牙科實驗室的雷射焊接	Dentistry - Quality assurance during laser welding - Part 1: Laser welding in dental laboratories
DIN 13972-2-2002	牙科學.雷射焊接品質保證.第2部分:雷射焊接用相同和類似牙科金屬材料適用性	Dentistry - Quality assurance during laser welding - Part 2: Suitability of identical and similar metallic dental materials for laser welding
DIN 2311-1-1998	使用附加材料的雷射光束表面處理的規范和認可.第1部分:使用消耗材料的雷射表面處理規范	Specification and approval of laser beam surface treatment using additional materials - Part 1: Laser surface treatment specification using consumables
DIN 30965-2000	雷射技術.雷射光束淬透性試驗	Laser engineering - Laser beam hardenability test
DIN 32511-1994	材料處理用電子束工藝及雷射工藝.工藝和設備的術語	Electron beam process and laser beam process for material treatment; terms for processes and equipment
DIN 51866-1-2000	溫度測量.第1部分:雷射光譜學測量法的測量圖	Temperature measurement - Part 1: Survey of laser spectroscopic methods
DIN 51936-1994	炭素材料的試驗.高溫下用雷射脈沖法測定熱擴散率.固體材料	Testing of carbon materials; determination of thermal diffusity at high temperatures by the laser pulse method; solid materials
DIN 56912-1999	光顯示雷射器和雷射顯示系統.安全性要求	Safety requirements for Lightshow lasers and laser lightshow systems
DIN 65571-4-1992	航空航太.增強纖維.複絲紗的長絲直徑的測定.雷射干涉測量法	Aerospace; reinforcement fibres; determination of filament diameter of filament yarns; laser interferometry
DIN EN 1011-6-2006	焊接.金屬材料焊接的推薦標準.第6部分:雷射射線焊接.德文版本EN 1011-6-2005	Welding - Recommendation for welding of metallic materials - Part 6: Laser beam welding; German version EN 1011-6:2005
DIN EN 12254-2002	雷射工作場所的遮罩.安全要求和檢驗 (包括修改件 A1:2002); 德文版本 EN 12254:1998 + A1:2002	Screens for laser working places - Safety requirements and testing (includes Amendment A1:2002); German version EN 12254:1998 + A1:2002
DIN EN 12584-1999	氧基燃料火焰切割、雷射光束切割和等離子切割的缺陷.術語; 三國語言版本 EN 12584:1999	Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology; Trilingual version EN 12584:1999
DIN EN 207-2002	個人眼睛防護.防激光輻射的濾光器和眼鏡保護裝置(雷射防護鏡) (包括修改件 A1:2002); 德文版本 EN 207:1998	Personal eye-protection - Filters and eye-protection against laser radiation (laser eye-protectors) (includes amendment A1:2002); German version EN 207:1998 + A1:2002
DIN EN 208-2002	個人眼睛防護.雷射器和雷射系統校準工作用眼鏡防護鏡(雷射校準眼睛防護鏡) (包括修改件 A1:2002); 德文版本	Personal eye-protection - Eye-protectors for adjustment work on lasers and lasersystems (laser adjustment eye-protectors) (includes amendment A1:2002); German version EN 208:1998 + A1:2002
DIN EN 2266-005-2006	航空系列.一般用途的電纜,電器.55C和200C之間的操作溫度.第005部分:可列印UV雷射.產品標準	Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 005: UV-laser printable - Product standard; German and English version EN 2266-005:2005
DIN EN 2266-007-2006	航空系列.一般用途的電纜,電器.55C和200C之間的操作溫度.第007部分:UV雷射列印多芯電纜.產品標準	Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 007: UV laser printable multicore jacketed cable - Product standard; German and English version EN 2266-007:2005
DIN EN 2267-008-2006	航空系列.一般用途的電纜,電器.55C和260C之間的操作溫度.第008部分:DM族.單個可列印UV雷射和多芯附件.產品	Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 008: DM family, single UV laser printable and muticore assembly - Product standard; German and English version EN 2267-008:2005
DIN EN 60601-2-22-1996	醫療電器設備.第2部分:診斷和治療用雷射設備安全性特殊要求	Medical electrical equipment - Part 2: Particular requirements for the safety of diagnostic and therapeutic laser equipment (IEC 60601-2-22:1995); German version EN 60601-2-22:1996
DIN EN 60825 Bb.9-2005	雷射產品安全性.第9部分：非相干光輻射最大允許曝光量的彙集.(IEC/TR 60825-9-1999)	Safety of laser products - Part 9: Compilation of maximum permissible exposure to incoherent optical radiation (IEC/TR 60825-9:1999)
DIN EN 60825-1-2003	雷射產品的安全.第1部分:設備分類、要求和用戶指南	Safety of laser products - Part 1: Equipment classification, requirements and user's guide (IEC 60825-1:1993 + A1:1997 + A2:2001); German version EN 60825-1:1994 + A1:2002 + A2:2001
DIN EN 60825-12-2004	雷射產品的安全.第12部分:用于資訊傳輸?shù)淖杂煽臻g光學通信系統的安全	Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information (IEC 60825-12:2004); German version EN 60825-12:2004
DIN EN 60825-2 Berichtigung 1-2006	雷射產品的安全.第2部分:光纖通信系統的安全(OFCS).DIN EN 60825-2 (VDE 0837-2)-2005的勘誤	Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) (IEC 60825-2:2004); German version EN 60825-2:2004, Corrigenda to DIN EN 60825-2 (VDE 0837-2):2005-06
DIN EN 60825-2-2005	雷射產品的安全.第2部分:光纖通信系統(OFCS)的安全	Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) (IEC 60825-2:2004); German version EN 60825-2:2004
DIN EN 60825-4-2004	雷射產品的安全.第4部分:雷射防護器	Safety of laser products - Part 4: Laser guards (IEC 60825-4:1997 + A1:2002 + A2:2003); German version EN 60825-4:1997 + A1:2002 + A2:2003
DIN EN 60856-1994	"影音光碟”50Hz/625行預錄光學反射視盤系統.PAL制	Pre-recorded optical reflective videodisk system "Laser vision" 50 Hz/625 lines; PAL (IEC 60856:1986 + A1:1993); German version EN 60856:1993 + A1:1993
DIN EN 60856/A2-1998	50Hz/625行的預錄製的光學反射"雷射可視"視盤系統.PAL制.修正A2	Pre-recorded optical reflective videodisk system "Laser vision" 50 Hz/625 lines; PAL (IEC 60856:1986/A2:1997); Amendment A2; German version EN 60856:1993/A2:1997
DIN EN 61040-1993	激光輻射功率和能量測量用探測器、測量儀和設備	Power and energy measuring detectors, instruments and equipment for laser radiation (IEC 61040:1990); German version EN 61040:1992
DIN EN 61096-1993	數位音頻雷射唱盤放音設備特性測量方法	Methods of measuring the characteristics of reproducing equipment for digital audio compact discs (IEC 61096:1992); German version EN 61096:1993
DIN EN 61104-1993	影音光碟系統.12cm影音光碟-CD-V	Compact disc video system; 12 cm CD-V (IEC 61104:1992); German version EN 61104:1992
DIN EN 61280-1-4-2003	光纖通信子系統試驗程式.第1-4部分:一般通信子系統.多模纖維雷射發射機用二維近場資料的採集和整理	Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems; Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters (IEC 61280-1-4:2003); German version EN 61280-1-4:2003
DIN EN 61280-2-10-2006	纖維光學通信子系統試驗程式.第2-10部分:數位系統.雷射發射機的時間分辨線性調頻脈沖和α因數測量(IEC 6128	Fibre optic communication subsystem test procedures - Part 2-10: Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters (IEC 61280-2-10:2005); German version EN 61280-2-10:2005
DIN EN 61751-1998	電信用的雷射模量.可靠性評定	Laser modules used for telecommunication - Reliability assessment (IEC 61751:1998); German version EN 61751:1998
DIN EN 62107-2001	高級影音光碟.光碟交換系統.規范	Super video compact disc - Disc-interchange system-specification (IEC 62107:2000); German version EN 62107:2001
DIN EN 62148-11-2004	纖維光學有源元件及器件.包裝和介面標準.第14部分:14針集成調製器雷射二極體發射器	Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator-integrated laser diode transmitters (IEC 62148-11:2003); German version EN 62148-11:2003
DIN EN 62148-12-2004	光纖有源元件及器件.包裝和介面標準.第12部分:帶同軸RF連接器的雷射發射機	Fibre optic active components and devices - Package and interface standards - Part 12: Laser transmitters with coaxial RF connector (IEC 62148-12:2004); German version EN 62148-12:2004
DIN EN 62149-3-2004	纖維光學有源元件和器件.性能標準.第3部分:2.5Gbit/s調製器-集成雷射二極體發射機	Fibre optic active components and devices - Performance standards - Part 3: 2,5 Gbit/s modulator-integrated laser diode transmitters (IEC 62149-3:2004); German version EN 62149-3:2004
DIN EN 821-2-1997	高級陶瓷.整體陶磁.熱物理性能.第2部分:用雷射閃光法(或熱能脈沖)測定導熱能力	Advanced technical ceramics - Monolithic ceramics, thermo-physical properties - Part 2: Determination of thermal diffusity by the laser flash (or heat pulse) method; German version EN 821-2:1997
DIN EN ISO 11145-2006	光學和光子學.雷射和相關設備.術語和符號(ISO 11145:2006)	Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2006); German version EN ISO 11145:2006
DIN EN ISO 11146-1-2005	雷射和雷射相關設備.雷射光束寬度、發散角和束擴散率的試驗方法.第1部分:無象散和簡單象散束	Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams (ISO 11146-1:2005); German version EN ISO 11146-1:2005
DIN EN ISO 11146-2-2005	雷射和雷射相關設備.雷射光束寬度、發散角和束擴散率的試驗方法.第2部分:一般象散束	Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams (ISO 11146-2:2005); German version EN ISO 11146-2:2005
DIN EN ISO 11151-1-2000	雷射和雷射設備.標準光學元件.第1部分:紫外線、可見光和近紅外線光譜范圍用元件	Lasers and laser-related equipment - Standard optical components - Part 1: Components for the ultraviolet, visible and near-infrared spectral range (ISO 11151-1:2000); German version EN ISO 11151-1:2000
DIN EN ISO 11151-2-2000	雷射和雷射設備.標準光學元件.第2部分:紅外光譜范圍用元件	Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2000); German version EN ISO 11151-2:2000
DIN EN ISO 11252-2005	雷射器和雷射相關設備.雷射裝置.對檔的最低要求	Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2004); German version EN ISO 11252:2004
DIN EN ISO 11254-1-2000	雷射和雷射設備.雷射誘導的光學表面損傷閾值的測定.第1部分:1-on-1試驗	Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1-on-1 test (ISO 11254-1:2000); German version EN ISO 11254-1:2000
DIN EN ISO 11254-2-2002	雷射和雷射相關設備.光學表面雷射誘導損傷閾的測定.第2部分:S-on-1 試驗 (ISO 11254-2:2001); 德文版本 EN	Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S-on-1 test (ISO 11254-2:2001); German version EN ISO 11254-2:2001
DIN EN ISO 11551-2004	光學和光學儀器.雷射和雷射設備.光學雷射元件光吸收性試驗方法	Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components (ISO 11551:2003); German version EN ISO 11551:2003
DIN EN ISO 11553-1-2005	機械安全.雷射加工機械.第1部分:一般安全要求	Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005); German version EN ISO 11553-1:2005
DIN EN ISO 11554-2006	光學和光子學.雷射和相關雷射設備.雷射光束功率、能量和時間特徵的試驗方法(ISO 11554:2006)	Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006); German version EN ISO 11554:2006
DIN EN ISO 11670-2003	雷射和雷射相關設備.雷射光束參數的試驗方法.束定位穩定性	Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability (ISO 11670:2003); German version EN ISO 11670:2003
DIN EN ISO 11810-1-2005	雷射和雷射有關設備.手術布單和/或病人保護用覆蓋物耐雷射性試驗方法和分類.第1部分:基本點燃和穿透性	Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Part 1: Primary ignition and penetration (ISO 11810-1:2005); German version EN ISO 11810-1:2005
DIN EN ISO 11990-2003	光學和光學儀器.雷射和雷射設備.氣管導管柄雷射抗性的測定	Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts (ISO 11990:2003); German version EN ISO 11990:2003
DIN EN ISO 12005-2003	雷射和雷射相關設備.雷射光束參數的試驗方法.偏振	Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization (ISO 12005:2003); German version EN ISO 12005:2003
DIN EN ISO 13694-2000	光學和光學設備.雷射和雷射相關設備.雷射光束能量密度分佈的試驗方法	Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2000); German version EN ISO 13694:2000
DIN EN ISO 13695-2004	光學和光子學.雷射及其相關設備.雷射光譜特性的試驗方法	Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers (ISO 13695:2004); German version EN ISO 13695:2004
DIN EN ISO 13697-2006	光學和光子學.雷射和雷射相關的設備.光學雷射元件的鏡面反射率和正透視度的試驗方法(ISO 13697-2006)	Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components (ISO 13697:2006); German version EN ISO 13697:2006
DIN EN ISO 13919-1-1996	焊接.電子和雷射光束焊接接頭.品質缺陷等級指南.第1部分:鋼	Welding - Electrons and laser beam welded joints; guidance on quality levels for imperfections - Part 1: Steel (ISO 13919-1:1996); German version EN ISO 13919-1:1996
DIN EN ISO 13919-2-2001	焊接.電子和雷射光束焊接接頭.品質缺陷等級導則.第1部分:鋁及可焊鋁合金	Welding - Electron and laser beam welded joints; Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001); German version EN ISO 13919-2:2001
DIN EN ISO 14408-2005	雷射手術用氣管掐管.標識及隨機檔要求	Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information (ISO 14408:2005); German version EN ISO 14408:2005
DIN EN ISO 15367-1-2004	雷射和雷射相關設備.雷射光束波陣面形狀的測試方法.第1部分:術語和基礎領域	Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects (ISO 15367-1:2003); German version EN ISO 15367-1:2003
DIN EN ISO 15367-2-2005	雷射及雷射相關設備.雷射光束波前形狀測定用試驗方法.第2部分:Shack-Hartmann感測器	Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 2: Shack-Hartmann sensors (ISO 15367-2:2005); German version EN ISO 15367-2:2005
DIN EN ISO 15609-4-2004	金屬材料焊接程式的規范和合格評定.焊接程式規范.第4部分:雷射光束焊接	Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO 15609-4:2004); German version EN ISO 15609-4:2004
DIN EN ISO 15614-11-2002	金屬材料焊接程式的規范和鑒定.焊接程式試驗.第11部分:電子和雷射光束焊接 (ISO 15614-11:2002); 德文版本 EN	Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002); German version EN ISO 15614-11:2002
DIN EN ISO 15616-1-2003	高品質焊接和切割用CO2雷射機驗收試驗.第1部分:通則和驗收條件	Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003); German version EN ISO 15616-1:2003
DIN EN ISO 15616-2-2003	高品質焊接和切割用CO2雷射機驗收試驗.第2部分:靜態和動態精度測定	Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003); German version EN ISO 15616-2:2003
DIN EN ISO 15616-3-2003	高品質焊接和切割用CO2雷射機驗收試驗.第3部分:氣體流量和壓力測量儀校正	Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003); German version EN ISO 15616-3:2003
DIN EN ISO 17526-2003	光學和光學儀器.雷射器和雷射相關設備.雷射器的使用壽命	Optic and optical instruments - Lasers and laser-related equipment - Lifetime of lasers (ISO 17526:2003); German version EN ISO 17526:2003
DIN EN ISO 22827-1-2006	Nd:YAG雷射射線焊接機器的加速試驗.帶光纖傳送的機器.第1部分:雷射裝配(ISO 22827-1-2005).德文版本 EN ISO	Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 1: Laser assembly (ISO 22827-1:2005); German version EN ISO 22827-1:2005
DIN EN ISO 22827-2-2006	Nd:YAG雷射射線焊接機器的加速試驗.帶光纖傳送的機器.第2部分:移動裝置(ISO 22827-2-2005).德文版本 EN ISO	Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 2: Moving mechanism (ISO 22827-2:2005); German version EN ISO 22827-2:2005
DIN EN ISO 9513 Bb.2-2005	金屬材料.單軸向試驗用伸長計的校準.雷射伸長計系統及其校準	Metallic materials - Calibration of extensometers used in uniaxial testing - Laser extensometer systems and their calibration
DIN ISO 10110-17-2004	光學和光子學.光學元件和系統製圖準備.第17部分:雷射輻照損傷閾	Optics and photonics - Preparation of drawings for optical elements and systems - Part 17: Laser irradiation damage threshold (ISO 10110-17:2004)
DIN ISO 2971-2004	香煙和過濾嘴.標稱直徑的測定.使用雷射光束測量儀器的方法	Cigarettes and filter rods - Determination of nominal diameter - Method using a laser beam measuring apparatus (ISO 2971:1998)
DIN ISO 8130-13-2005	粉末涂料.第13部分:採用雷射衍射的粒度分析	Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2001)
DIN V 32540-1997	雷射光束磨蝕.雷射光束熱磨蝕.定義、影響因素、程式	Laser beam removing - Thermal removing with laser beam - Definitions, influence factors, procedure
編號	中文名稱	英文名稱

歐洲雷射標準(EN laser standards)

ANSI　|　 BS　|　 DIN　|　 EN　|　 GB　|　 ISO　|　 JIS　|　 NF　|

編號	中文名稱	英文名稱
EN 12254-1998+A1-2002	雷射工作場所遮罩　安全要求和試驗	Screens for laser working places - Safety requirements and testing
EN 12584-1999	氧氣火焰切割、雷射光束切割和等離子體切割的缺陷　術語	Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology
EN 12626-1997	機械安全　雷射加工機械　安全要求	Safety of machinery - Laser processing machines - Safety requirements (ISO 11553:1996 modified)
EN 207-1998+A1-2002	個人眼睛保護裝置抗激光輻射用濾光器和護目器（雷射護目鏡）	Personal eye-protection - Filters and eye-protectors against laser radiation (laser eye-protectors)
EN 208-1998+A1-2002	個人眼睛保護裝置雷射和雷射系統調節工作用護目鏡（雷射調節護目鏡）	Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
EN 31252-1994	雷射和雷射設備雷射裝置對檔的最低要求	Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:1993)
EN 31253-1994	雷射和雷射設備雷射裝置機械介面	Lasers and laser-related equipment - Laser device - Mechanical interfaces (ISO 11253:1993)
EN 60601-2-22-1996	醫療電氣設備　第2－22部分：診斷和治療用雷射設備安全的特殊要求	Medical electrical equipment - Part 2-22: Particular requirements for the safety of diagnostic and therapeutic laser equipment (IEC 60601-2-22:1995)
EN 60825-1-1994+A2-2001+A11-1996	雷射產品的輻射安全　第1部分：設備分類、要求和用戶指南	Safety of laser products; part 1: equipment classification, requirements and users guide (IEC 60825-1:1993)
EN 60825-1/prA3-1999	雷射產品的輻射安全　第1部分：設備分類、要求和用戶指南修改草案3	Amendment to IEC 60825-1: Cross-reference Annex for associated parts of IEC 60825
EN 60825-1/prAA-1999	雷射產品的輻射安全　第1部分：設備分類、要求和用戶指南修改草案ＡＡ	Amendment 2 to IEC 60825-1: Safety of laser products - Part 1: Equipment classification, requirements and users guide
EN 60825-2-2000	雷射產品安全　第2部分：光纖通信系統的安全	Safety of laser products - Part 2: Safety of optical fibre communication systems (IEC 60825-2:2000)
EN 60825-4-1997+A1-2002	雷射產品安全　第4部分：雷射防護裝置	Safety of laser products - Part 4: Laser guards (IEC 60825-4:1997)
EN 60856-1993+A1-1993+A2-1997	行預錄式光反射視盤系統"影音光碟" 50Hz/625行PAL制	Pre-recorded optical reflective videodisk system "Laser vision" 50 Hz/625 lines; PAL (IEC 60856:1986)
EN 60908-1999	雷射唱片數位音響系統規范	Audio recording - Compact disc digital audio system (IEC 60908:1999)
EN 61040-1992	激光輻射功率和能量測量探測器、儀錶和設備	Power and energy measuring detectors, instruments and equipment for laser radiation (IEC 61040:1990)
EN 61096-1993+A1-1996	數位音頻雷射唱盤重放設備特性的測量方法	Methods of measuring the characteristics of reproducing equipment for digital audio compact discs (IEC 61096:1992)
EN 61280-1-4-2003	光纖通信子系統試驗程式　第1-4部分：一般通信子系統　多模纖維雷射發射機的雙維近場資料的收集和整理	Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems; Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters (IEC 61280-1-4:2003) / Note: Endorsement notice
EN 61751-1998	電信用雷射模組　可靠性評估	Laser modules used for telecommunication - Reliability assessment (IEC 61751:1998)
EN 62107-2001	高級影音光碟　光碟交換系統　規范	Super video compact disc - Disc-interchange system-specification (IEC 62107:2000)
EN 821-2-1997	先進技術陶瓷單片陶瓷熱物理特性第2部分：雷射閃爍法(熱脈沖法)對熱擴散率的測定	Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method
EN ISO 11145-2001	光學和光學儀器　雷射和雷射設備　辭彙和符號	Optics and optical instruments - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2001)
EN ISO 11146-1999	雷射和雷射設備　雷射光束參數的試驗方法　束寬、發散角和束擴散因數	Lasers and laser-related equipment - Test methods for laser beam parameters - Beam widths, divergence angle and beam propagation factor (ISO 11146:1999)
EN ISO 11149-1997	光學和光學儀器　雷射和雷射設備　非電信雷射設備用光纖連接器	Optics and optical instruments - Lasers and laser-related equipment - Fibre optic connectors for non-telecommunication laser applications (ISO 11149:1997)
EN ISO 11151-1-2000	雷射和雷射設備　標準光學元件　第1部分：紫外線、可見和近紅外光譜范圍用元件	Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral range (ISO 11151-1:2000)
EN ISO 11151-2-2000	雷射和雷射設備　標準光學元件　第2部分：紅外光譜范圍用元件	Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2000)
EN ISO 11254-1-2000	雷射和雷射設備　光學表面雷射導致?lián)p傷閾值的測定　第1部分：1-on-1試驗	Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1-on-1 test (ISO 11254-1:2000)
EN ISO 11254-2-2001	雷射和雷射設備　光學表面雷射導致?lián)p傷閾值的測定　第2部分：S on 1試驗	Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S on 1 test (ISO 11254-2:2001)
EN ISO 11551-1997	光學和光學儀器　雷射和雷射設備　光學雷射元件光吸收性試驗方法	Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components (ISO 11551:1997)
EN ISO 11554-2003	光學和光學儀器　雷射和雷射設備　雷射光束功率、能量和時間特徵的試驗方法	Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2003)
EN ISO 11670-2003	雷射和雷射設備　雷射光束參數的試驗方法　束定位穩定性	Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability (ISO 11670:2003)
EN ISO 11810-2002	光學及光學儀器　雷射及雷射設備　外科布簾和/或病人防護衣抗雷射照射性的試驗方法	Optics and optical instruments - Lasers and laser-related equipment - Test method for the laser-resistance of surgical drapes and/or patient protective covers (ISO 11810:2002)
EN ISO 11990-2003	光學和光學儀器　雷射和雷射設備　導管雷射抗性的測定	Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts (ISO 11990:2003)
EN ISO 12005-2003	雷射和雷射設備　雷射光束參數的試驗方法　偏振	Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization (ISO 12005:2003)
EN ISO 13694-2000	光學和光學儀器　雷射和雷射設備　雷射光束能量密度分佈的試驗方法	Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2000)
EN ISO 13919-1-1996	焊接　電子束和雷射焊接頭　缺陷的品質分級指南　第1部分：鋼	Welding - Electrons and laser-beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel (ISO 13919-1:1996)
EN ISO 13919-2-2001	焊接　電子束和雷射焊接頭　缺陷的品質分級指南　第2部分：鋁及其可焊合金	Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001)
EN ISO 15367-1-2003	雷射及雷射設備　雷射光束波前形狀的測試方法　第1部分：術語及基本外貌	Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects (ISO 15367 1:2003)
EN ISO 15614-11-2002	金屬焊接工藝的規范和驗收　焊接工藝試驗　第11部分：電子和雷射光束焊	Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002)
EN ISO 15616-1-2003	高品質焊接及切割用二氧化碳雷射光束機的驗收試驗　第1部分：一般原則、驗收條件	Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003)
EN ISO 15616-2-2003	高品質焊接及切割用二氧化碳雷射光束機的驗收試驗　第2部分：靜止及動態精度的測量	Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003)
EN ISO 15616-3-2003	高品質焊接及切割用二氧化碳雷射光束機的驗收試驗　第3部分：氣流量及氣壓測量儀的校正	Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003)
EN ISO 17526-2003	光學及光學儀器雷射及雷射設備　雷射器的壽命	Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers (ISO 17526:2003)
EN ISO 9956-11-1996	金屬材料焊接工藝規程及認可　第11部分：雷射光束焊接工藝規程	Specification and approval of welding procedures for metallic materials - Part 11: Welding procedure specification for laser beam welding (ISO 9956-11:1996)
prEN 120014-1992	空白詳細規范　同軸接收雷射器	Blank detail specification; coaxial receptable laser
prEN 120017-1992	空白詳細規范　光學T(指數O)罐式雷射器	Blank detail specification; optical T<(Index)O> can laser
prEN 1419-1994	電子束和雷射光束的鋼焊縫關于缺陷品質水準的指南	Electron and laser beam welded joints in steel; guidance on quality levels for imperfections
prEN 2266-007-2000	航空航太系列通用電纜工作溫度 55 ℃ 和 200 ℃ 之間第007部分：UV雷射可列印的多芯套內電纜產品	Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 200℃ - Part 007: UV laser printable multicore jacketed cable - Product standard
prEN 2267-008-1999	航空航太系列通用電纜工作溫度 55 ℃ 和 200 ℃ 之間第008部分：008 DMA 系列單芯UV雷射列印和多	Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 260℃ - Part 008: DM family, single UV laser printable and multicore assembly - Product standard
prEN 2346-004-2001	航空航太系列耐火電纜工作溫度65 ℃ and 260 ℃之間第004部分：DN 系列 UV單芯雷射印刷和多芯組裝	Aerospace series - Cables, electrical, fire-resistant; Operating temperatures between -65℃ and 260℃ - Teil 004: DN family, single UV laser printable and multicore assembly; Light weight; Product standard
prEN 2713-011-2000	航空航太系列　一般用途的單芯和多芯電纜　工作溫度在－55℃和260℃之間第011部分：遮罩（螺旋）和護套	Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 200℃ - Part 011: Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard
prEN 2714-011-1999	航空航太系列　一般用途的單芯和多芯電纜　工作溫度在－55℃和260℃之間第011部分：遮罩（螺旋）和護套	Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 260℃ - Part 011: DM family, screened (spiral) and jacketed, UV laser printable - Product standard
prEN 2714-012-1999	航空航太系列　一般用途的單芯和多芯電纜　工作溫度在－55℃和260℃之間第0012部分：遮罩（編織的）和護	Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 260℃ - Part 012: DM family, screened (braided) and jacketed, UV laser printable - Product standard
prEN 288-11-1994	金屬材料焊接程式規范和鑒定第11部分：雷射光束焊的焊接程式規范	Specification and approval of welding procedures for metallic materials - Part 11: Welding procedure specification for laser beam welding
prEN 60825-5-1992	雷射產品的安全　設備分類、要求和用戶指南　第5部分：光纖通信安全系統　草案	Radiation safety of laser products; equipment classification, requirements, and users guide; part 5: the safety of optical fibre communications systems
prEN ISO 11553-1-2002	機械安全　雷射加工機械　安全要求	Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO/DIS 11553-1:2002) / Note: Intended as replacement for EN 12626 (1997-02).
prEN ISO 15609-4-2000	金屬焊接工藝的規范和驗收　焊接工藝規范　第4部分：雷射光束焊	Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO/DIS 15609-4:2000)
編號	中文名稱	英文名稱

中國雷射標準(GB laser standards)

ANSI　|　 BS　|　 DIN　|　 EN　|　 GB　|　 ISO　|　 JIS　|　 NF　|

編號	中文名稱	英文名稱
GB 10320-1995	雷射設備和設施的電氣安全	Electrical safety of laser equipment and installations
GB 10435-1989	作業場所激光輻射衛生標準	Hygienic standard for laser radiation in the work environment
GB 11748-2005	二氧化碳雷射治療機	Carbon dioxde Laser Treating Intrument
GB 12257-2000	氦氖雷射治療機通用技術條件	General specification of He-Ne laser medical equipment
GB 18151-2000	雷射防護屏	Laser guards
GB 18217-2000	雷射安全標志	Laser safety signs
GB 18490-2001	雷射加工機械安全要求	Laser processing machines--Safety requirements
GB 7247.1-2001	雷射產品的安全第1部分:設備分類、要求和用戶指南	Safety of laser products--Part 1:Equipment classification，requirements and user’s guide
GB 9706.20-2000	醫用電氣設備第2部分:診斷和治療雷射設備安全專用要求	Medical electrical equipment--Part 2:Particular requirements for the safety of diagnostic andtherapeutic laser equipment
GB/T 11153-1989	雷射小功率計性能檢測方法	Parameters testing method of laser power meter in low range
GB/T 11293-1989	固體雷射材料名詞術語	Terms and definitions of solid-state laser materials
GB/T 11295-1989	雷射晶體棒型號命名方法	Designation for laser crystal rods
GB/T 11297.1-2002	雷射棒波前畸變的測量方法	Test method for wavefront distortion of laserrods
GB/T 11297.2-1989	雷射棒側向散射係數的測量方法	Test method for side direction scatteringcoefficient of laser rods
GB/T 11297.3-2002	摻釹釔鋁石榴石雷射棒消光比的測量方法	Test method for extinction ratio of Nd∶YAG laser rods
GB/T 11297.4-1989	摻釹釔鋁石榴石雷射棒長脈沖雷射閾值及斜率效率的測量方法	Test method fornormal pulse lasing threshold and slope efficiency of Nd:YAG laser rods
GB/T 11297.5-1989	摻釹釔鋁石榴石雷射棒連續雷射閾值、斜率效率和輸出功率的測量方法	Test method for continuous lasing threshold， slope efficiency and output power of Nd∶YAG laser rods
GB/T 12082-1989	氣體雷射器文字符號	Letter symbols for gas lasers
GB/T 12083-1989	氣體雷射器電源系列	Power supply series for gas lasers
GB/T 12377-1990	空氣中微量鈾的分析方法雷射螢光法	Analytical method of microquantity uranium in air by laser-fluoremetry
GB/T 13739-1992	激光輻射橫模鑒別方法	Testing method of transverse mode of laser radiation
GB/T 13740-1992	激光輻射發散角測試方法	Testing method of divergence angle of laser radiation
GB/T 13741-1992	激光輻射光束直徑測試方法	Testing method of beam diameter of laser radiation
GB/T 13842-1992	摻釹釔鋁石榴石雷射棒	Neodymium-doped yttrium aluminium garnet laser rods
GB/T 13863-1992	激光輻射功率測試方法	Testing method for laser radiant power
GB/T 13864-1992	激光輻射功率穩定度測試方法	Testing method for laser radiant power stability
GB/T 14078-1993	氦氖雷射器技術條件	He-Ne laser specification
GB/T 14128-1993	摻銣釔鋁石榴石雷射棒尺寸系列	Dimension series for neodymium-doped yttrium aluminium garnet laser rods
GB/T 15175-1994	固體雷射器主要參數測試方法	Measurement methods for main parameter of solid-state lasers
GB/T 15301-1994	氣體雷射器總規范	General specification for gas lasers
GB/T 15313-1994	雷射術語	Terminology for laser
GB/T 15490-1995	固體雷射器總規范	General specification for solid state lasers
GB/T 15649-1995	半導體雷射二極體空白詳細規范	Blank detail specification for semiconductor laser diodes
GB/T 15860-1995	雷射唱機通用技術條件	General specification for compact disc players
GB/T 16601-1996	光學表面雷射損傷閾值測試方法第1部分:1對1測試	Test methods for laser induced damage threshold of optical surfaces--Part 1: 1 on 1 test
GB/T 17540-1998	臺式雷射印表機通用規范	General specification for desktop laser printer
GB/T 17736-1999	雷射防護鏡主要參數測試方法	Testing method of main parameters for laserprotective eyewear
GB/T 18683-2002	鋼鐵件雷射表面淬火	Laser surface hardening of iron and steel parts
GB/T 18904.2-2002	半導體器件第12-2部分:光電子器件纖維光學系統或子系統用帶尾纖的雷射二極體模組空白詳細規范	Semiconductor devices--Part 12-2:Optoelectronic devices--Blank detail specification for laser diodes modules with pigtail for fiber optic systems or sub-systems
GB/T 19077.1-2003	粒度分析雷射衍射法	Particle size analysis--Laser diffraction method
GB/T 20485.11-2006	振動與沖擊感測器校準方法第11部分：雷射干涉法振動絕對校準	Methods for the calibration of vibration and shock transducers - Part 11: Primary vibration calibration by laser interferometry
GB/T 20485.13-2007	振動與沖擊感測器校準方法第13部分: 雷射干涉法沖擊絕對校準	()
GB/T 20722-2006	雷射加工機器人通用技術條件	General specifications of laser processing robots
GB/T 21199-2007	雷射印表機干式單組份顯影劑	()
GB/T 21200-2007	雷射印表機干式雙組份顯影劑用色調劑	()
GB/T 21201-2007	雷射印表機干式雙組份顯影劑	()
GB/T 4799-2001	雷射器型號命名方法	The type designation for laseres
GB/T 6360-1995	雷射功率能量測試儀器規范	Specification for laser radiation power and energy measuring equipment
GB/T 6598-1986	小角雷射光散射法測定聚苯乙烯標準樣品的重均分子量	Determination of weight-average molecular weight of polystyrene standards by low angle laser light scattering method
GB/T 7257-1987	氦氖雷射器參數測試方法	Measurement methods of parameter for helium neon laser
GB/Z 18461-2001	雷射產品的安全生產者關于激光輻射安全的檢查清單	Safety of laser products--Manufacturer’s checklist for radiation safety of laser products
GB/Z 18462-2001	雷射加工機械金屬切割的性能規范與標準檢查程式	Laser processing machines--Performance specifications and benchmarks for cutting of metals
HG/T 2172-2003	紅雷射影像記錄片	()
JB/T 10334-2002	雷射印表機測試版（A4）	()
JB/T 10406-2004	內燃機雷射淬火氣缸套技術條件	()
JB/T 10454-2004	雷射印表機負電性有機光導鼓技術條件	()
JB/T 10625-2006	雷射選區燒結快速成形機床技術條件	Selective laser sintering prototyping machines-Technical requirements
JB/T 10626-2006	立體光固化雷射快速成形機床技術條件	Stereolifhography laser prototyping machines-Technical requirements
JB/T 10741-2007	雷射印表機充電輥技術條件	Specification of the primary charging roller for laser printer
JB/T 10785-2007	大功率橫流連續波二氧化碳雷射器	The high power transverse flow continuous wave CO2 lasers
JB/T 5524-1991	實驗室雷射安全規則	()
JB/T 5610-2006	雷射干涉儀	Laser interferometer
JB/T 5748-1991	紅寶石雷射器主要參數測試方法	()
JB/T 5749-1991	釹玻璃雷射器主要參數測試方法	()
JB/T 6249-1992	氦鎘雷射器主要參數測試方法	()
JB/T 6250.1-1992	YAG 連續雷射器主要參數測試方法	()
JB/T 6250.2-1992	YAG 脈沖雷射器主要參數測試方法	()
JB/T 6859-1993	氣體雷射器主要參數	()
JB/T 6860-1993	測量激光輻射功率能量的探測器、儀器與設備	()
JB/T 7795-1995	雷射器和與雷射有關的設備機械介面	()
JB/T 9317-1999	雷射指向儀	()
JB/T 9326-1999	雷射喇曼分光光度計	()
JB/T 9489-1999	氬離子雷射器主要參數 測試方法	()
JB/T 9490-1999	二氧化碳雷射器主要參數 測試方法	()
JB/T 9491-1999	氦氖雷射器主要參數 測試方法	()
JB/T 9492-1999	釔鋁石榴石雷射器參數系列	()
JC/T 721-2006	水泥顆粒級配測定方法雷射法	()
MT 870-2000(2005)	煤礦用防爆雷射指向儀	()
QB/T 1730-1993	氦氖雷射傳真膠片	()
SH/T 1612.8-2005	工業用精對苯二甲酸粒度分佈的測定——雷射衍射法	()
SY/T 6131-1995	碎屑巖粒度的測定雷射法	()
YS/T 617.7-2007	鋁、鎂及其合金粉理化性能測定方法第7部分粒度分佈的測定雷射散射/衍射法	Determination of chemical compositions and physical properties of aluminum powder,magnesium powder and Al-Mg alloy powder Part 7 Determination of particle size distribution Laser scatterance/diffraction method
編號	中文名稱	英文名稱

日本雷射標準(JIS laser standards)

ANSI　|　 BS　|　 DIN　|　 EN　|　 GB　|　 ISO　|　 JIS　|　 NF　|

編號	中文名稱日本語標題	英文名稱
JIS C5940-1997	光纖傳輸用雷射二極體總則光伝送用半導體レーザ通則	General rules of laser diodes for fiber optic transmission
JIS C5941-1997	光纖傳輸用雷射二極體測量方法光伝送用半導體レーザ測定方法	Measuring methods of laser diodes for fiber optic transmission
JIS C5942-1997	錄放用雷射二極體總則再生及び記録用半導體レーザ通則	General rules of laser diodes used for recording and playback
JIS C5943-1997	錄放用雷射二極體測量方法再生及び記録用半導體レーザ測定方法	Measuring methods of laser diodes used for recording and playback
JIS C5944-2005	光纖傳輸用雷射二極體設備的一般原則光伝送用半導體レーザモジュール通則	General rules of laser diode modules for fiber optic transmission
JIS C5945-2005	光纖傳輸用雷射二極體設備的測量方法光伝送用半導體レーザモジュール測定方法	Measuring methods of laser diode modules for fiber optic transmission
JIS C5946-2005	光學纖維放大鏡用雷射二極體模件的一般規則光ファイバ増幅器用半導體レーザモジュール通則	General rules of laser diode modules for optical fiber amplifier
JIS C5947-2005	光學纖維放大鏡用雷射二極體模件的測量方法光ファイバ増幅器用半導體レーザモジュール測定方法	Measuring methods of laser diode modules for optical fiber amplifier
JIS C6180-1991	雷射輸出功率的測量方法レーザ出力測定方法	Measuring methods for laser output power
JIS C6181-1995	激光輻射功率和能量測量用檢波器、儀器和設備レーザ放射パワー及びエネルギー測定用検出器，測定器及び測定裝置	Power and energy measuring detectors, instruments and equipment for laser radiation
JIS C6182-1991	雷射光束用光強度儀的試驗方法レーザビーム用光パワーメータ試験方法	Test methods of optical power meters for laser beam
JIS C6801-1988	雷射安全的術語彙編レーザ安全用語	Glossary of terms used in laser safety
JIS C6802-2005	雷射產品的安全性レーザ製品の安全基準	Safety of laser products
JIS C6803-2006	雷射產品的安全.光纖通信系統的安全レーザ製品の安全―光ファイバ通信システムの安全	Safety of laser products -- Safety of optical fibre communication systems
JIS H7801-2005	用雷射閃爍法測量金屬的熱擴散性的方法金屬のレーザフラッシュ法による熱拡散率の測定方法	Method for measuring thermal diffusivity of metals by the laser flash method
JIS K5600-9-3-2006	涂料的試驗方法.第9部分:涂料粉末.第3節:用雷射衍射進行粒度分析涂料一般試験方法―第９部：粉體涂料―第３節：レーザ回折による粒度分佈の測定方法	Testing methods for paints -- Part 9: Coating powders -- Section 3: Particle size analysis by laser diffraction
JIS R1611-1997	雷射閃爍法測定精細陶瓷的熱擴散率、比熱容量、熱傳導率試驗方法ファインセラミックスのレーザフラッシュ法による熱拡散率?比熱容量?熱伝導率試験方法	Test methods of thermal diffusivity, specific heat capacity, and thermal conductivity for fine ceramics by laser flash method
JIS R1629-1997	雷射衍射法對細陶瓷原料粉末的粒子尺寸分佈進行的測定ファインセラミックス原料のレーザ回折?散亂法による粒子徑分佈測定方法	Determination of particle size distributions for fine ceramic raw powders by laser diffraction method
JIS R1667-2005	用雷射閃爍法測定連續纖維增強陶瓷基體複合物的熱擴散性長繊維強化セラミックス複合材料のレーザフラッシュ法による熱拡散率測定方法	Determination of thermal diffusivity of continuous fiber-reinforced ceramic matrix composites by the laser flash method
JIS R3251-1995	用雷射干涉法檢測低膨脹玻璃的線性熱膨脹係數的測量方法低膨張ガラスのレーザ干渉法による線膨張率の測定方法	Measuring method of the linear thermal expansion coefficient for low expansion glass by laser interferometry
JIS R3252-1994	雷射干涉儀檢測玻璃勻質性的測量方法ガラスのレーザ干渉法による均質度の測定方法	Measuring method for the homogeneity of glasses by laser interferometry
JIS T1204-1988	雷射凝固儀レーザ光凝固裝置	Laser photocoagulators
JIS T8143-1994	防雷射照射的濾光器和護目器レーザ保護フィルタ及びレーザ保護めがね	Filters and eye-protectors against laser radiation
JIS Z8825-1-2001	粒度分析.雷射衍射法.第1部分:一般原理粒子徑解析　―　レーザー回折法　―　第１部：測定原理	Particle size analysis -- Laser diffraction methods -- Part 1: General principles
編號	中文名稱日本語標題	英文名稱

法國雷射標準(NF laser standards)

ANSI　|　 BS　|　 DIN　|　 EN　|　 GB　|　 ISO　|　 JIS　|　 NF　|

編號	中文名稱	英文名稱
NF A80-232-1999	有氧火焰切割,雷射光束切割和原生質切割檢驗.術語(歐洲標準EN 12584)	(IMPERFECTIONS IN OXYFUEL FLAME CUTS, LASER BEAM CUTS AND PLASMA CUTS. TERMINOLOGY. (EUROPEAN STANDARD EN 12584).)
NF A89-010-11-1996	金屬材料焊接工藝的驗收和規范.第11部分:雷射光束焊接工藝規范	(SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 11 : WELDING PROCEDURE SPECIFICATION FOR LASER BEAM WELDING. (EUROPEAN STANDARD EN ISO 9956-11).)
NF A89-057-11-2002	金屬材料焊接程式規范和鑒定.焊接程式試驗.第11部分:電子和雷射射線焊接	(Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11 : electron and laser beam welding.)
NF A89-233-1996	焊接.電子束和雷射光束焊接接頭.缺陷的品質級別導則.第1部分:鋼	(WELDING. ELECTRONS AND LASER BEAM WELDED JOINTS. GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS. PART 1 : STEEL. (EUROPEAN STANDARD EN ISO 13919-1).)
NF A89-234-2001	焊接.電子和雷射光束焊接接頭.缺陷的品質級別導則.第1部分:鋁及其可焊合金	(Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2 : aluminium and its weldable alloys.)
NF A89-701-1-2003	CO2雷射切割、焊接機的驗收試驗.第1部分:通用原理和驗收條件	(Acceptance tests for CO2-laser beam machines for welding and cutting - Part 1 : general principles, acceptance conditions.)
NF A89-701-2-2003	CO2雷射切割、焊接機的驗收試驗.第2部分:靜態和動態準確度的測定	(Acceptance tests for CO2-laser beam machines for welding and cutting - Part 2 : measurement of static and dynamic accuracy.)
NF A89-701-3-2003	CO2雷射切割、焊接機的驗收試驗.第3部分:氣體流量和壓力測量儀的校準	(Acceptance tests for CO2-laser beam machines for welding and cutting - Part 3 : calibration of instruments for measurement of gas flow and pressure.)
NF B41-214-1997	高技術陶瓷.單片陶瓷.熱物理特性.第2部分:雷射閃爍(或熱脈沖)法測定熱擴散率	(ADVANCED TECHNICAL CERAMICS. MONOLITHIC CERAMICS. THERMO-PHYSICAL PROPERTIES. PART 2 : DETERMINATION OF THERMAL DIFFUSIVITY BY THE LASER FLASH (OR HEAT PULSE) METHOD. (EUROPEAN STANDARD EN 821-2).)
NF C43-803-1993	雷射輻射功率和能量測量用探測器、儀器和設備	(Power and energy measuring detectors, instruments and equipment for laser radiation.)
NF C43-805-1994	雷射產品的安全.第1部分:設備分類、要求和用戶指南	(Safety of laser products - Part 1 : equipment classification, requirements and user`s guide.)
NF C43-805/A11-2000	雷射產品的安全.第1部分:器材的分類、要求和用戶指南	(Safety of laser products - Part 1 : equipment classification, requirements and user's guide.)
NF C43-806-1994	雷射產品的安全.第2部分:光纖通信系統的安全	(Safety of laser products. Part 2 : safety of optical fibre communication systems.)
NF C74-341-1996	醫療電氣設備.第2部分:診斷和治療用雷射設備安全性特殊要求	(Medical electrical equipment. Part 2 : particular requirements for the safety of diagnostic and therapeutic laser equipment.)
NF C93-806-1998	遠端通信用雷射模組.可靠性評估	(Laser modules used for telecommunication. Reliability assessment.)
NF C97-133-1993	預錄光學反射視盤系統.50Hz/625行PAL制“影音光碟“	(Pre-recorded optical reflective videodisk system. “l(fā)aser vision“ 50 hz/625 lines Pal.)
NF C97-134-1992	影音光碟系統.12cm CD-V.(歐洲標準EN 61104)	(Compact disc video system 12 cm CD-V.)
NF C97-140-2001	高級影音光碟.光碟交換系統.規范	(Super video compact disc - Disc-interchange system - Specification.)
NF E60-601-1997	機械裝置的安全.雷射加工機械.安全要求	(Safety of machinery. Laser processing machines. Safety requirements.)
NF S10-100-1994	雷射和相關設備.雷射裝置.文獻的最低要求(EN 32152)	(LASERS AND LASER-RELATED EQUIPMENT. LASER DEVICE. MINIMUM REQUIREMENTS FOR DOCUMENTATION. (EUROPEAN STANDARD EN 31252).)
NF S10-101-1994	雷射和相關設備.雷射裝置.機械介面(EN 31253)	(LASERS AND LASER-RELATED EQUIPMENT. LASER DEVICE. MECHANICAL INTERFACES. (EUROPEAN STANDARD EN 31253).)
NF S10-102-1997	光學和光學儀器.雷射及雷射相關設備.非電信雷射設備用光纖連接器	(Optics and optical instruments. Lasers and laser-related equipment. Fibre optic connectors for non-telecommunication laser applications.)
NF S10-105-2002	光學和光學儀器.雷射和雷射相關設備.辭彙和符號	(Optics and optical instruments - Lasers and laser-related equipment - Vocabulary and symbols.)
NF S10-112-1-2000	雷射和雷射相關設備.光學表面的雷射誘導損壞閾測定.第1部分:合在一起的試驗	(Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1 on 1 test.)
NF S10-112-2-2001	雷射和雷射相關設備.光學表面雷射誘導損傷閾的測定.第2部分:S-on-1試驗	(Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2 : S-on-1 test.)
NF S10-113-1997	光學和光學儀器.雷射和與雷射相關的設備.光學雷射元件光吸收性測試	(Optics and optical instruments. Lasers and laser-related equipment. Test method for absorptance of optical laser components.)
NF S10-121-2003	光學和光學儀器.雷射和相關雷射設備.雷射光束功率、能量和時間特徵的試驗方法	(Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics.)
NF S10-122-2003	雷射和雷射設備.雷射光束參數的試驗方法:束定位穩定性	(Lasers and laser-related equipment - Test methods for laser beam parameters : Beam positional stability.)
NF S10-124-2000	光學和光學設備.雷射和雷射相關設備.雷射光束能量密度分佈的試驗方法	(Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution.)
NF S10-128-2003	光學和光學儀器.雷射和雷射相關設備.雷射器的壽命	(Optics and optical instruments - Lasers and laser-related equipments - Lifetime of lasers.)
NF S77-111-1998	個人眼睛保護.防止雷射輻射的濾膜和眼睛保護器(雷射眼保護器)	(Personal eye-protection. Filters and eye-protectors against laser radiation (laser eye-protectors).)
NF S77-111/A1-2002	人眼防護.防雷射輻射濾光鏡和護目鏡(雷射護目鏡)	(Personal eye-protection - Filters and eye-protectors against laser radiation (laser eye-protectors).)
NF S77-112-1998	個人眼睛保護.用于雷射和雷射系統調準工作的眼保護器(雷射調節眼保護器)(歐洲標準208)	(Personal eye-protection. Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors).)
NF S77-112/A1-2002	人眼防護.在雷射器和雷射系統上作校準工作用的眼鏡防護裝置(雷射校準護目鏡)	(Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors).)
NF S77-126-1999	雷射工作場所用遮罩物.安全要求和試驗	(Screens for laser working places. Safety requirements and testing.)
NF S77-126/A1-2002	雷射工作場所用遮罩物.安全要求和試驗	(Screens for laser working places - Safety requirements and testing.)
NF S95-170-2000	光學和光學儀器.雷射和雷射相關設備.氣管導管柄雷射阻力的測定	(Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts.)
NF S97-132-2003	光學和光學儀器.雷射和雷射相關設備.手術單和/或病人保護罩耐雷射性的試驗方法	(Optics and optical instruments - Lasers and laser-related equipment - test method for the laser-resistance of surgical drapes and/or patient-protective covers.)
NF V37-012-1998	捲煙和過濾咀.公稱直徑的測定.使用雷射光束測量儀器的方法	(Cigarettes and filter rods. Determination of nominal diameter. Method using a laser beam measuring apparatus.)
NF X11-666-1-2000	顆粒尺寸分析.雷射衍射方法.第1部分:一般規則	(Particle size analysis - Laser diffraction methods - Part 1 : general principles.)
編號	中文名稱	英文名稱